Installing a scanner is usually quite easy. For the most part it's plug and play. That is, you plug in your scanner into your computer, install the scanner software, and play! But there can be a few "gotchas" along the way.
Basic Tools: A can of compressed air, glass cleaner, lens brush, black paper, spare scanner bulb, screw drivers, and black paper masks for 2 1/4" and 4" x 5" transparencies and negatives
	Some scanners have proprietary interface cards - these should be avoided, if possible, unless you: A) are getting an incredible deal; B) prefer that particular kind of interface; or C) get masochistic pleasure from fiddling with your computer and any incompatibilities that may ensue. A better alternative is to choose a scanner with a SCSI interface. The big advantage to SCSI is that you can easily add on a variety of different kinds of devices: everything from CD ROM drives to removable hard disks, tape drives, modems and of course, other scanners. Most current scanners are available in SCSI versions, and for good reason. SCSI is an open, fast and generally reliable technology. However, many scanner communication problems are caused by borderline SCSI subsystems. You may have a borderline SCSI system if you have experienced any of the following: Scans that fail to finish, slow performance, "can't find scanner" warnings or mysterious program crashes and errors. Even hard disk crashes can be traced to failures or conflicts somewhere in the SCSI chain. Some people never have SCSI problems and can't understand what all the fuss is about. Others curse their computers daily and wonder what they did wrong in a previous life. For PC users a SCSI driver needs to be loaded into your CONFIG.SYS file. Typically this file is tagged with a name such as ASPI.SYS which stands for Advanced SCSI Programming Interface. Mac users have it easy - SCSI has been a Mac standard since the Mac Plus. SCSI Gremlins Unfortunately, even for Mac users, SCSI can be a black art. Master SCSI and you can legitimately call yourself a master of the universe (If you can't master it, don't fret, almost everybody else is in SCSI purgatory as well). But there is salvation. Over the years the tao of SCSI has been revealed to me. Hence, I hereby divulge The Ten SCSI Commandments:

I.	Thou shalt not use cheap SCSI cables
II.	Thou shalt not use total SCSI cable length greater than 18 feet
III.	Thou shalt consider buying active SCSI termination (such as SCSI Sentry from APS technologies)
IV.	Thou shalt keep thy SCSI IDs separate
V.	Thou shalt use up-to-date hard disk (and CD-ROM) drivers
VI.	Thou shalt always use but one terminator at the end of the SCSI chain
VII.	Thou shalt use similar quality and length cables for all thy SCSI devices
VIII.	Thou shalt patiently wait the coming of new technologies
IX.	Thou shalt suspect older SCSI hard drives as potential sources of evil
X.	Thou shalt not attempt to install more than six SCSI devices in one SCSI chain
	Follow the above commandments and you will surely avoid SCSI hell. Disregard them at your peril. Look forward to the coming of FireWire technology from Apple as well as the competing SCSI 3 specification which, eventually, will replace today's SCSI standard entirely. Until then, keep praying.

	Email:	comments@hsdesign.com
	Design by:	Haywood & Sullivan
	Copyright:	© 1996 Michael J. Sullivan